Linsn LEDSet is a powerful software tool used for controlling and managing LED displays. One of the key features of Linsn LEDSet is the ability to upload RCG files to LED displays, allowing users to easily customize and display content on their LED screens. In this article, we will discuss how to upload an RCG file to an LED display using Linsn LEDSet.
To begin, you will need to have the Linsn LEDSet software installed on your computer. Once the software is installed, connect your LED display to your computer using the appropriate cables and ensure that the display is powered on. In this case, we will use X100 video processor as the reference.
1, Open the Linsn LEDSet software, make sure the it shows “Status: Connected”, then we can go the further steps.
2. click “Screen Configuration”,
3.Then it will enter into Hardware Setup. Click “receiver”.
4.In the receiver page, click ”load from file”, choose the correct RCG, RCFGX file you that is saved in your computer.
5.After finish loading the RCG file from your computer, click all cabinets, and reset card starting coordinates.
6. The last step is to save the RCG file to the receiving card, or we have to load the RCG file again after we restart the LED display, this is very important.
It is important to note that the process of uploading an RCG file to an LED display using Linsn LEDSet may vary slightly depending on the specific model of LED display you are using. It is recommended to refer to the user manual or documentation provided by the manufacturer for detailed instructions on how to upload RCG files to your specific LED display.
In conclusion, Linsn LEDSet provides a user-friendly and efficient method for uploading RCG files to LED displays, allowing users to easily customize and display content on their LED screens. By following the steps outlined in this article, you can take full advantage of the capabilities of Linsn LEDSet and create captivating visual displays on your LED screen.
Post time: May-09-2024