Lipontšo tsa Phatlalatso ea LED: Tataiso e Feletseng

Lipontšo tsa lipapatso tsa LED li fetotse tsela eo likhoebo li hapang tlhokomelo le ho fetisa melaetsa ka eona. Ka lipono tsa bona tse mahlahahlaha, ho sebetsa hantle ha matla, le ho feto-fetoha ha maemo, ke sesebelisoa sa bohlokoa haholo bakeng sa papatso ea sejoale-joale. Ho blog ena, re tla hlahloba lintlha tsa bohlokoa tsa matšoao a papatso ea LED, melemo ea ona, le mokhoa oa ho khetha e nepahetseng bakeng sa litlhoko tsa hau.

Matšoao a Phatlalatso ea LED ke afe?
Letšoao la lipapatso tsa LED ke liboto tsa ponts'o tsa dijithale tse sebelisang li-light-emitting diode (LED) ho etsa litšoantšo tse khanyang le tse mebala-bala, livideo kapa mongolo. Hangata li sebelisoa mabenkeleng, libotong tsa lipapatso, libakeng tsa liketsahalo, le libakeng tsa sechaba ho khothaletsa lihlahisoa, litšebeletso kapa liketsahalo.

Mefuta ea Matšoao a Phatlalatso ea LED
Matšoao a LED a ka Hare:

E sebelisoa mabenkeleng a mabenkele, mabenkele le liofisi tsa khoebo.
E loketse ho shebelloa haufi-ufi ka boholo ba pixel e phahameng bakeng sa litaba tse qaqileng.
Matshwao a Kantle a LED:

E etselitsoe ho mamella maemo a leholimo.
Maemo a phahameng a khanya ho netefatsa ponahalo ea khanya ea letsatsi.
Letšoao la LED la Mobile:

E behiloe holim'a literaka kapa litereilara bakeng sa papatso e matla.
E nepahetse bakeng sa liketsahalo kapa masolo a hlokang motsamao.
Matšoao a tloaelehileng a LED:

Meetso e etselitsoeng litlhoko tse khethehileng tsa brand.
E kenyelletsa libopeho tse ikhethang, boholo le meralo joalo ka 3D kapa li-curved displays.
Melemo ea Matšoao a Phatlalatso ea LED
Lipono tse khahlang mahlo:
Mebala e khanyang le lipopae tse matla li hohela tlhokomelo ka katleho ho feta matšoao a tsitsitseng.

Matla a Matla:
Li-LED li sebelisa matla a fokolang ha li bapisoa le mehloli ea leseli la setso, ho fokotsa litšenyehelo tsa ts'ebetso.

Nako e telele:
Lipontšo tsa LED li hahiloe hore li tšoarelle, ka ho hanyetsa maemo a tikoloho joalo ka pula, mocheso le lerōle.

Ho feto-fetoha ha litaba:
Ntlafatsa litaba habonolo ka software, ho etsa hore ho be bonolo ho tsamaisa matšolo a mangata kapa lipapatso.

Litšenyehelo ha nako e ntse e ea:
Le hoja lichelete tsa pele li ka 'na tsa e-ba holimo, ho tšoarella le litšenyehelo tse tlaase tsa tlhokomelo li etsa hore e be moruo oa nako e telele.

Lisebelisoa tsa Letšoao la Phatlalatso la LED
Thekiso:
Ntlafatsa ponahalo ea lebenkele 'me u khothaletse litefiso tse khethehileng.

Khamphani:
Hlahisa likatleho tsa k'hamphani kapa fana ka matšoao a tataiso.

Boithabiso:
Totobatsa liketsahalo, likonsarete, le lipapatso tsa lifilimi.

Lipalangoang:
Hlahisa linako, lipapatso, kapa liphatlalatso tsa bohlokoa libakeng tsa lipalangoang.

Kamohelo ea baeti:
Tsebisa baeti ka litšebeletso kapa lipapatso tsa lihotele le lireschorente.

Lintlha Tseo U Lokelang ho li Nahana ha U Khetha Letšoao la Phatlalatso la LED
Morero:

Etsa qeto ea hore na letšoao le tla sebelisoa ka tlung kapa ka ntle.
Boholo le Qeto:

E le hore u shebelle haufi-ufi, khetha khetho e phahameng.
Matšoao a ka ntle a ka hloka boholo bo boholo le li-pixel tse tlase.
Khanya le Phapang:

Netefatsa ponahalo e nepahetseng tlasa maemo a mabone a fapaneng.
Sistimi ea Taolo:

Batla software e bonolo ho basebelisi e lumellang lintlafatso tse bonolo tsa litaba.
Tekanyetso:

Lekola litšenyehelo tsa pele le ho boloka nako e telele ho tsoa ho ts'ebeliso ea matla le ho tšoarella nako e telele.
Mekhoa ea Lipontšo tsa Phatlalatso ea LED
Lipontšo tsa Interactive:
Li-touchscreens tse sebetsang li hohela bamameli le ho fana ka boiphihlelo bo ikhethileng.

Li-LED tsa Eco-Friendly:
Ka mathata a ntseng a eketseha a ts'ebetso, theknoloji ea LED e sebetsang hantle e ntse e ata.

Lipontšo tsa LED tsa 3D:
Lits'oants'o tse ikhethang tsa 3D li theha boiphihlelo bo tebileng, bo loketseng papatso e nang le tšusumetso e phahameng.

Qetello
Lipontšo tsa lipapatso tsa LED ke sesebelisoa se matla bakeng sa likhoebo tse batlang ho etsa tšusumetso e matla ea pono. Ho tloha lits'ebetsong tse nyane tse ka pele ho mabenkele ho ea ho liboto tse kholo tsa kantle, ho feto-fetoha ha tsona le katleho ea tsona ha li bapisoe. Ka ho utloisisa litlhoko tsa khoebo ea hau le ho nahana ka lintlha tsa bohlokoa joalo ka sebaka, boholo, le maemo a feto-fetohang, o ka khetha letšoao le phethahetseng la papatso la LED ho phahamisa ponahalo ea mofuta oa hau.

U itokiselitse ho ntlafatsa leano la hau la papatso? Tsetela ho matšoao a papatso ea LED kajeno!